Pallet Racking Systems

Pallet Racking Built Around How Your Warehouse Works

Pallet racking is a steel storage system of upright frames and horizontal beams that holds palletised goods at several levels, so you use the height of your building instead of buying more floor space. The right pallet racking system depends on three things: how many different products you store, how fast they move, and how much floor you can give to aisles.

Storemax designs, supplies and installs warehouse pallet racking across Melbourne, Sydney, Brisbane, Adelaide and Perth, from a single run of selective pallet racking to high-density drive-in, shuttle and powered mobile systems. Mitre 10 stores are among the businesses running Storemax racking today.

Types of pallet racking


Dexion pallet racking installation

Dexion Racking


Industrial shelving and racking setup

Double Deep Pallet Racking


Drive in pallet racking for high density storage

Drive In Pallet Racking


Heavy duty shelving for warehouse storage

Heavy Duty Shelving


Industrial warehouse racking system

Narrow Aisle Pallet Racking


Pallet shuttle racking system in warehouse

Pallet Shuttle Racking


Warehouse racking and shelving solution

Powered Mobile Pallet Racking


Storage racking configuration in warehouse

Push Back Pallet Racking


Pallet racking system installed in warehouse

Selective Pallet Racking


Warehouse storage system layout

Used Pallet Racking

Which Type of Pallet Racking Fits Your Warehouse?

Every pallet racking type trades access for density. The more pallets you squeeze into a space, the fewer of them you can reach directly. Use this table to shortlist, then talk to us about your exact stock profile.

TypeAccess to palletsStorage densityBest for
SelectiveEvery pallet, any timeStandardMany different products, mixed picking
Double deepFront pallet first, rear pallet behind itHigherFewer products with two or more pallets each
Drive inLast in, first out from each laneVery highLarge quantities of the same product, cold rooms
Push backLast in, first out, loaded from one aisleHighBulk stock where one-aisle loading saves space
Gravity flowFirst in, first out on inclined rollersHighDate-sensitive stock that must rotate
Pallet shuttleShuttle moves pallets inside deep lanesVery highHigh-volume lines with fast in-and-out
Narrow aisleEvery pallet, with specialist trucksHigher than selectiveSites that need full access but less aisle space
Powered mobileRacks move on bases to open one aisle at a timeVery highSlow-moving stock and expensive space such as cold storage
Used pallet rackingDepends on systemDepends on systemTight budgets and short-term sites

A practical rule: if you store hundreds of products with one or two pallets each, start with selective or narrow aisle. If you store a few products with many pallets each, look at drive in, push back or shuttle.

Pallet racking types compared by pallet access and storage density
How the main pallet racking types trade pallet access for storage density, by Storemax. Graphic created with AI assistance.

Sized for the Australian Pallet

Australia uses a square standard pallet of 1165 x 1165 mm, which is larger than the common European and US pallets. Beam lengths, bay widths and frame depths all need to suit it, and imported racking sized for other pallets often does not. Our guide to pallet warehouse racking and the Australian pallet explains the sizing in detail.

Capacity is the other half of sizing. Every bay should carry a load sign showing the maximum unit load and the total load per level and per bay. SafeWork NSW lists the details a racking supplier should provide, including the working load limits and the maximum distances between beam levels (SafeWork NSW pallet racking fact sheet). For the maths behind the sign, see how to calculate rack load capacity, and for comparing quotes, pallet racking specifications explained.

The Australian standard for steel storage racking is now in two parts: AS 4084.1:2023 for design and AS 4084.2:2023 for operation and maintenance.

Expanding an Existing Racking System

Most businesses do not start from an empty shed. If you already have racking, adding to it with mismatched parts is one of the most common safety problems we see. Storemax supplies racking from well-known brands and can advise on what is compatible with the system you already have, including second-hand options through our used pallet racking range.

Before adding bays, have the existing installation checked. SafeWork NSW advises that replacement components should come from the original manufacturer, or be confirmed as compatible by an engineering report.

From First Visit to Racking Ready for Stock

  1. Consultation: we look at your building, stock, pallets, handling equipment and growth plans.
  2. Design and quotation: a layout drawing and a quote you can compare line by line.
  3. Installation: frames, beams, anchors and safety locks fitted, with load signs on every bay.
  4. Handover: the finished installation is checked against the design before it goes into use.
  5. Ongoing safety: a formal racking inspection by a competent person at least every 12 months, plus our safety audits when you need them.

Forklift impact is the main cause of racking damage, so most sites also fit upright protectors at the aisle ends and turning points.

The five steps of a pallet racking project with Storemax, from consultation to annual inspection. Graphic created with AI assistance.

Pallet Racking Projects We Have Delivered

  • Mitre 10, Ballarat: 45-year-old hardwood racking that no longer met WorkSafe requirements was replaced without stopping the store’s operations.
  • B2C Furniture, Victoria and NSW: new racking for the move from Dandenong to a larger Braeside warehouse, plus a new site at Arndell Park.
This field is for validation purposes and should be left unchanged.
Name(Required)

Pallet Racking Questions We Get Asked

What is the most common type of pallet racking in Australia?

Selective pallet racking. It gives direct access to every pallet, works with standard counterbalance forklifts and suits sites that store many different products.

How much weight can pallet racking hold?

It depends on the beam length and profile, the frame, and the height to the first beam. Each level and each bay has its own limit, and both are shown on the load sign. Never go by a single headline number from a brochure.

Can I add new bays to my old racking?

Often yes, if the new parts are made by the same manufacturer or confirmed compatible by an engineer. Mixing brands without checking can weaken the whole run.

Does pallet racking need to be inspected?

Yes. SafeWork NSW guidance says formal inspections should be done by a competent person at intervals not exceeding 12 months, with damage reported as soon as it happens.

Is used pallet racking safe?

It can be, when it is inspected, free of damage, matched to its original specifications and installed with correct load signs. Avoid bent or rusted components.

Do you install outside the capital cities?

Our teams are based in Melbourne, Sydney, Brisbane, Adelaide and Perth. For a regional site, call us on 1300 832 426 and we will confirm what we can offer.

Plan Your Pallet Racking With Storemax

Send us your floor plan, pallet sizes and a rough idea of how much stock you hold, and we will suggest a layout and the racking type that suits it. Use the enquiry form above, call 1300 832 426, or contact our team.